Protemp PT-05-240-GH User Manual download pdf (Page 9)

NEVER LEAVE HEATER UNATTENDED WHILE

CONNECTED TO A POWER SOURCE

Maintenance

Cleaning and Maintenance

– Before cleaning the appliance, disconnect it

from the outlet and let it cool down.

– In order to protect the enclosure, don’t

splash water onto the heater, and never

use a solvent like gasoline, isoamyl acetate,

toluene, etc. to clean the heater

– The enclosure is easy to get dirty. Wipe it

often with a soft sponge. For very dirty parts,

wipe with a sponge dipped in < 122°F water

and mild detergent, then dry the heater

enclosure with a clean cloth. Be careful not to

let the water enter the inside of the appliance.

Operation

Grounding Instructions

PT-03-240-GH / PT-05-240-GH:

– This heater is for use on 240 (or 208) volts.

The cord has a plug as shown in gure 2

(below). No adapter is available for this blade

conguration, and none should be used. The

type outlet is a 240 (or 208) volt grounding

outlet. When properly installed, it provides a

ground connection through the cord to the

heater to protect the operator from electric

shock.

– Be sure that the electrical receptacle is of the

conguration and capacity appropriate for the

heater.

Figure 2

NEMA L6-20P

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Protemp PT-05-240-GH User Manual Page 9